Follow

How to connect to Bluetooth

Bluetooth 4.0 with A2DP:

For Bluetooth pairing, unplug the audio cable and hold down the power button (FROM AN 'OFF' STATE) for 4 seconds to make your SubPac® S2 visible to devices, the Bluetooth LED will turn solid blue. Search for ‘SubPac S2’ in your transmitting device’s Bluetooth settings and pair with it as per the manufacturer’s recommendations. When successfully paired the LED will flash until audio is played, where it will turn solid again. Note that plugging in the line-in cable will automatically turn off Bluetooth and will disrupt streaming.

Was this article helpful?
1 out of 2 found this helpful
Have more questions? Submit a request

Comments

  • Avatar
    k9d
    I have a Windows 10 Laptop with a Qualcomm Atheros AR3012 Bluetooth 4.0 chip in it. After I hold the power button to get a solid blue Bluetooth light on the subpac the PC can never find the subpac. Forever stuck in "Your PC is searching for and can be discovered by Bluetooth devices." Have tried toggling bluetooth off/on in Windows Settings, tried rebooting the machine, tried starting subpac bluetooth with PC bluetooth off and toggling it on, tried starting subpac bluetooth wit PC bluetooth on. Nothing!
  • Avatar
    Justin Jimenez

    I've had the same problem, is there something about windows 10 that it can't work on? Feedback is appreciated

  • Avatar
    Justin Jimenez

    I've had the same problem, is there something about windows 10 that it can't work on? Feedback is appreciated

  • Avatar
    Joao Carlos

    Same thing, just receive my S2 and windows 10 wont find it (asus z170i motherboard). Wondering if there is a solution as I cant go with the cable option on my setup.

  • Avatar
    Hugues Laliberte

    Hi guys,

    I followed the procedure above to connect my Android phone via Bluetooth and it works perfectly.

    But are we supposed to run this procedure each time we power on the M2 ? At the moment it's the only way for me to use Bluetooth. I thought once paired we only select the M2 in the list of devices. But the M2 does not appear in the list of usual devices, it appears in More Settings, but even if i click on it, it won't connect. I need to run the pairing procedure each time.

Powered by Zendesk